My Basket

  • Your basket is empty!

    Let's change that.

Complete Protection Kit

Complete Protection Kit - Caramics Ceramic Coating

  • £139.95
4 interest-free payments of £34.99 with


In Stock, ready to despatch

Fastest delivery tomorrow. Order within

Can I use the Caramics Paintwork Protection Kit on any paint type?

You can use the Caramics Paintwork Protection Kit on any paint type such as wrapped and matte.

Can I use this on my motorbike?

You can use the Caramics Paintwork Protection Kit on any painted parts of your motorbike.

What do I do before applying the Paintwork Protection Kit?

We would recommend following these steps before applying the Caramics Paintwork Protection Kit.Step one: Pre-cleaner - Citrus Power.Step two: Snow foam - Avalanche.Step three: The all-important two-bucket method contact wash - Lather.Step Five: Drying. Step Six: multi-stage decontaminationDecontamination stage 1: iron dissolver - Iron Out.Decontamination stage 2: solvent tar remover.  - ObliTARateDecontamination stage 3: Clay Bar. Step Seven: Rinse and dryStep Eight: PolishingNow you are ready to protect your vehicle!

Can I use a wax over the top of my ceramic coating?

You can use a wax over the top of your ceramic coating on your maintenance washes however it will not benefit the durability, it will offer extra gloss.It may be worth looking at our Caramics Gloss Enhancer which will boost both the shine of your vehicle and the protection on your maintenance washes.

I have applied my ceramic coating, how do care for it?

We recommend washing your vehicle regularly.Step one: Pre-cleaner - Citrus Power.Step two: Snow foam - Avalanche.Step three: The all-important two-bucket method contact wash - Caramics Enhancing ShampooStep five: Drying. Step six: Adding shine - Caramics Gloss EnhancerWith regards to decontaminating your vehicle, we do not recommend using any decontamination products over your ceramic coating as it will affect the durability.As well as this we do not recommend polishing your vehicle once it has been ceramic coated as it will remove the coating.

Will my wheels bead when they have been ceramic coated?

The ceramic coat system will provide a barrier between your wheel and the elements making them bead water, and stay cleaner longer..

What wheel type can this be used on?

You can use the Caramics Wheel Protection Kit on any wheel type, whether it is matte, gloss, polished or diamond cut, to add ceramic protection.

Will this make my interior bead?

It will not make your leather, fabric or carpet bead. It will however ensure the stains/dirt will not get embedded in your interior and make it much easier clean and keep clean going forward.

Can I use this on my dashboard or interior plastics?

We do not recommend using this on your interior plastics, it has been designed for your fabric, carpet and leather.To protect your interior plastics take a look at our interior quick detailer Spritz.

Will this kit remove scratches on my glass?

Whilst this won't remove deeper scratches on the glass, it will restore clarity and remove/reduce light scratches.

What’s the difference between a wax and a ceramic coating?

The main difference comes in the way these protection layers bond to surfaces. A wax (like those in our Signature Wax Collection, along with Radiance Carnauba Creme and Mint Rims Wheel Wax), will physically hold on to the top layer, creating a strong bond and leaving a layer of wax protection that’s separate to the paintwork. Waxes can be durable from a few months, right up to 8-months or so, depending to the content of hard wax and other ingredients in the blend. A ceramic coating however, will chemically bond to the surface, essentially becoming an integral part of the top layer, and this is the reason why coatings tend to have more durability – because these molecular bonds are more resilient to chemicals and abrasion, making them more difficult to remove. The Si02-based coating in our Paintwork Protection Kit for example has a durability of up to 12-months for exactly this reason. It’s also explains why a ceramic coating cannot be applied over the top of a wax layer, because the wax will block the chemical bonding process, but a wax can be applied over a (fully cured) ceramic coating, because it will happily bond to almost any surface. Both types of protection layer are impermeable to moisture, make your paintwork appear deeper and shiner, and ensure that the vehicle is easier to clean the next time around – simply because the grime won’t stick. When it comes to choosing between the two, Waxes tend to be slightly easier to apply, and ceramic coatings tend to offer more hardy protection for daily drivers, but the truth is that, for the most part, it’s all down to personal preference… especially when it comes to looks. Ceramic coatings are man-made and engineered to be perfectly clear, allowing light to pass through and back to the eye completely uniformly. Hard waxes have a certain amount of natural impurities that bend and soften the light as it comes back to your eye – this is what gives them their trademark warm glow.

Do I need to polish my vehicle before applying ceramic protection?

All silica or quartz-based ceramic coatings (such as those found in our products Ceramic Spray Wax, Aqua Coat Hydrophobic Rinse Aid, Lavish Ceramic Foam, Caramics Gloss Enhancer, Caramics Enhancing Shampoo, Wash 'n' Gloss, and our flagship Caramics Protection Kits), use a layer of chemically bonded silicon dioxide (SiO2) to create a barrier between the surface and the elements that’s impermeable to water and only possible to remove by abrasion. In all their forms, and regardless of their durability, ceramic coatings are intended to add the hardiest protection to surfaces and, although they’re also designed to level the optical finish of paintwork and vinyl (including paint and powdercoat on wheels) - allowing light to bounce back to the eye more uniformly to make the finish appear deeper and glossier - the glass-like layer they install is not intended to hide underlying paint defects. So, when it comes to full paint decontamination and paint correction, the application of coating will still be effective with regards to physical protection, gloss and water beading without carrying out these processes, but you will not correct or obscure any defects already in the paintwork. This is why we always recommend carrying out any swirl mark or other defect removal, along with surface cleansing, prior to application of any protection layer (ceramic, wax or sealant) if you’re not completely happy with the condition of your paintwork. Especially when using a product intended for the most extreme durability such as our Caramics Paintwork Protection Kit, which installs a coating that lasts for up to a year. For maintenance washes, where SiO2 products are used to top up previously applied ceramic protection, we would assume that any paint correction necessary would have been carried out before the initial application of the coating. For preparing the surface for your coating, it's essential to use a product that doesn't contain waxes or fillers that will block the adhesion of the coating, such as our Revitalise System V2 Compounds and One Step All-in-One Compound. For the full rundown on the science of ceramic coatings and how they work see our article – What Difference Does A Ceramic Coating Actually Make.

What cleaning and polishing products are best to use with a ceramic coating?

The great thing about silica-based (SiO2) ceramic coatings is that they’re specifically developed to help your vehicle look better for longer. The hardy protection layer they install is essentially chemically bonded silicon dioxide, which is like glass, so it smooths the surfaces enough to prevent water molecules and grime from bonding. Regardless of application to paint, glass, vinyl or any other exterior surface, this is why they bead to the extreme and offer the longest lasting protection of any product. What’s most important here is that grime will sit on top of the ceramic layer rather than sticking, and this makes cleaning easier. But it’s still important to carry out safe maintenance to stop heavy grit and grime from being rubbed in and abrading the coating and the paintwork, causing the infliction of defects. Using coating-friendly pre-wash products, such as Citrus Power Bug and Grime Remover and Avalanche Snow Foam will also prevent damage to coatings because they don’t contain harsh acidic or alkaline cleaning agents that may etch into the top layer. It’s the same story for the shampoo you use in your two-bucket wash. Lather Car Shampoo is a great choice as it will never damage previously-applied coatings, but alternatively you can use Wash 'N' Gloss Car Shampoo or our Caramics Enhancing Shampoo to actively top-up and prolong the life and performance of your SiO2 coating as you wash paintwork, glass and all other exterior surfaces. Other products that are great for topping up during routine maintenance include Aqua Coat Hydrophobic Rinse Aid, Lavish Ceramic Foam, Caramics Gloss Enhancer, Caramics Glass Cleaner and Ceramic Spray Wax. When it comes to paint correction, all you have to remember is that Si02 coatings have to be allowed to chemically bond to the topcoat or lacquer layer, so it’s crucial to use a compound or a polish that doesn’t contain any waxes or fillers, because these extra layers will block the chemical bonding process. For paint correction, polishing and refinement before adding a coating, we’d recommend using products that only reveal a true finish, such as One Step All-in-One Compound, or our Revitalise System V2 Compounds (which are also available separately). Don’t forget that SiO2 coatings are extremely durable and can only be fully removed through abrasion, this means that polishing your vehicle using any abrasive after applying a ceramic coating will remove the Si02 layer, meaning that reapplication of protection will be required after you polish. For more on how to prepare a car for a ceramic coating, see our guide – Detailing and Ceramic Coating a New Car.

The Caramics System

Offering the ultimate in professional grade ceramic detailing products for you to apply at home, with step by step guides and all the products required to ceramic coat each and every surface of your vehicle. long lasting ceramic coating that offers unrivalled ease of application, and up to 12 months protection.

Product Details

Product Information

Categories: Protect
Product Type: Caramics Ceramic Coating
Product Code: CRP-K5

The ultimate car polishing kit for complete protection of every surface of your vehicle. From paint to glass, wheels, leather and fabric - protect all your vehicle surfaces, with a long lasting ceramic coating that offers unrivalled ease of application, and up to 12 months of durable protection for your car.

This kit contains - 

Caramics Paintwork Protection Kit

The ultimate in long-lasting protection and gloss for your vehicles paintwork that lasts up to 12 months. Caramics ceramic resin technology bonds to paintwork offering unrivaled protection, beading and easy clean properties that are designed to help keep your car looking better for longer.
2x 100ml Prep-Wipes, 8 x Ceramic Resin Wipes

Caramics Glass Coating Kit

The ultimate long lasting hydrophobic coatings for exterior automotive glass and windscreens an ultra hydrophobic, easy clean coating for better vision in all weather conditions.

1x 100ml Glass Polish, 6 x Glass Coating Wipes, 1 x 100ml Residue Remover

Caramics Wheel Coating Kit

The Caramics wheel sealant system offers long-lasting ceramic protection for all wheel finishes, from powder coated to diamond cut satin/matte and high polished metals. With a simple spray and wipe application, designed to help your wheels stay cleaner for longer.
1 x 100ml Prep-Wipe, 1 x 100ml Wheel Coating Spray, 4 x Micro Wipe Applicators

Caramics Interior Protection Kit

The Caramics Interior Protection Kit offers all you need to coat every surface of the cockpit of your vehicle, from leather upholstery to cloth seats and carpets. The built-in repellent and anti-dye stain technology will help maintain your interiors finish with ease.
1 x 100ml Prep-Wipe, 2 x 100ml Fabric & Carpet Protectors, 1 x 100ml Leather Spray, 4 x Micro Wipe Applicators

Protective Gloves
Instructional Guides
Sticker Emblems

Before you begin - 

Before application ensure the vehicle is clean, dry and free from any contaminants. We strongly recommend clay barring and polishing the vehicle prior to application of the Caramics ceramic resin coating system.


Do NOT apply in direct sunlight or to a hot car
Do NOT leave the coating to cure for longer then the specified time
Do NOT apply to a wet vehicle
Do NOT apply to any other surface than stated


  • Total Size: H 0.00mm x W 0.00mm x D 0.00mm
  • Weight: 2,710.00g

Need some advice? Speak to our detailing experts.

We are on hand to help answer all your detailing questions, simply let us know the product or situation and we'll do our best to assist you.

Get in touch