My Basket

 
  • Your basket is empty!

    Let's change that.

Get a faster checkout!

Hard Waxes

Essence 150g

All round car wax

Auto Finesse Essence Carnauba car wax is carefully blended by hand in Great Britain from the finest quality natural ingredients available. It contains 40% T1 Grade Brazilian Carnauba Wax by volume, with the remainder being made up of synthetic polymers, and gloss-intensifying oils. The waxes we use work as nature’s own defence against the elements, giving it water repellence, and resistance to environmental pollution (Including UV-fading, acid rain, and bird droppings). With its blueberry scent and effortless application, Essence lasts up to 3 months. Application:  Prior to waxing, ensure the vehicle is clean. Make sure there is no bonded contamination by using a clay bar to prep the surface. If paintwork hasn’t been polished in the last 6-12 months it’s advisable to use our pre-wax cleanser to further prep the surface. Turn a foam applicator or Waxmate a quarter turn in the pot to coat pad with the wax (should be enough for a single panel), apply with small, even, overlapping strokes. The goal when waxing is to apply the product as thinly and evenly as possible, spreading and pushing the product out evenly accross the panel - a little bit goes a very long way. Apply to the whole car before removing. When you are done waxing the entier vehicle, you will be ready to buff off the wax residue using a plush microfibre towel. If the wax has dried, or ‘secondary hazing’ of the wax occurs (A phenomenon which can sometimes happen in hot or humid climates, especially if the product was over-applied.), you can use a water-based quick detailer to help ease removal of the residue. Make sure to wait at least 3 hours in between layers of wax. Do not wax the vehicle if the ambient temperature is below 6 degrees Celsius, or above 25 degrees Celsius. Waxing in direct sunlight, or conditions of high humidity can lead to over, or under-curing of the product before removal.40

Read more


  • £44.95

Oppps, we only have in stock, please lower the quantity amount

Out of Stock

In Stock, ready to despatch

Essence

  • Developed to work on light and dark coloured paintworks.
  • Provides 3 months durability.
  • Blended with 40% T1 grade Brazilian carnauba wax.
  • Blueberry scent.
Essence 150g
Essence 150g
Essence 150g

Essence

Essence Carnauba Car Wax provides crisp bright reflections, warmth and depth to to all paint finishes, from Auto Finesse®

Essence 150g


Categories:
Hard Waxes
Product Type:
All round car wax
Product Code:
ESS150

Auto Finesse Essence Carnauba car wax is carefully blended by hand in Great Britain from the finest quality natural ingredients available. It contains 40% T1 Grade Brazilian Carnauba Wax by volume, with the remainder being made up of synthetic polymers, and gloss-intensifying oils. The waxes we use work as nature’s own defence against the elements, giving it water repellence, and resistance to environmental pollution (Including UV-fading, acid rain, and bird droppings).

With its blueberry scent and effortless application, Essence lasts up to 3 months.

Application: 

Prior to waxing, ensure the vehicle is clean. Make sure there is no bonded contamination by using a clay bar to prep the surface. If paintwork hasn’t been polished in the last 6-12 months it’s advisable to use our pre-wax cleanser to further prep the surface.

Turn a foam applicator or Waxmate a quarter turn in the pot to coat pad with the wax (should be enough for a single panel), apply with small, even, overlapping strokes. The goal when waxing is to apply the product as thinly and evenly as possible, spreading and pushing the product out evenly accross the panel - a little bit goes a very long way.

Apply to the whole car before removing. When you are done waxing the entier vehicle, you will be ready to buff off the wax residue using a plush microfibre towel.

If the wax has dried, or ‘secondary hazing’ of the wax occurs (A phenomenon which can sometimes happen in hot or humid climates, especially if the product was over-applied.), you can use a water-based quick detailer to help ease removal of the residue. Make sure to wait at least 3 hours in between layers of wax.

Do not wax the vehicle if the ambient temperature is below 6 degrees Celsius, or above 25 degrees Celsius. Waxing in direct sunlight, or conditions of high humidity can lead to over, or under-curing of the product before removal.

Features


  • Developed to work on light and dark coloured paintworks.
  • Provides 3 months durability.
  • Blended with 40% T1 grade Brazilian carnauba wax.
  • Blueberry scent.
Related posts

Related Posts

Kit Bag Essentials

Whether you're heading off to a car show or to your favourite holiday destination with the family, you want to be prepared for whatever detailing the ...

Read more

Directions for use

We've put together a few simple steps to help you get the best out of Essence 150g highlighting what you should be doing to get the most out of Essence 150g when detailing your pride and joy.

1.

Prior to waxing, ensure the vehicle is clean. Make sure there is no bonded contamination by using a clay bar to prep the surface. If paintwork hasn’t been polished in the last 6-12 months it’s advisable to use our pre-wax cleanser to further prep the surface.

2.

Turn a foam applicator or Waxmate a quarter turn in the pot to coat pad with the wax (should be enough for a single panel), apply with small, even, overlapping strokes. The goal when waxing is to apply the product as thinly and evenly as possible, spreading and pushing the product out evenly across the panel - a little bit goes a very long way.

3.

Apply to the whole car before removing. When you are done waxing the entier vehicle, you will be ready to buff off the wax residue using a plush microfibre towel.

4.

If the wax has dried, or ‘secondary hazing’ of the wax occurs (A phenomenon which can sometimes happen in hot or humid climates, especially if the product was over-applied.), you can use a water-based quick detailer to help ease removal of the residue. Make sure to wait at least 3 hours in between layers of wax.

5.

Do not wax the vehicle if the ambient temperature is below 6 degrees Celsius, or above 25 degrees Celsius. Waxing in direct sunlight, or conditions of high humidity can lead to over, or under-curing of the product before removal.