Revitalise No:1 (V2)
- Categories:
- Paint Correction
- Product Type:
- Restoring compound
- Product Code:
- RV1500
Our famous Revitalise range has just got better! It’s been re-engineered to a whole new level of abrasive capability, cutting deeper with a more refined and consistent finish. It removes deep swirl marks and restores tired paint that has been plagued by oxidisation, while offering a much faster and overall cleaner working experience.
Revitalise No:1 has been developed for use with a dual action or orbital machine polisher and is the first step in the Revitalise process to a fine-cut finish to paintwork.
Application:
Shake the product well before use to allow ingredients to mix well. Making sure you’re well out of direct sunlight and working on a cool surface that is clean, dry and free of contaminants, prep the orange Revitalise Pad No:1 with Auto Finesse® Pad Prime and apply two pea sized drops to the pad. Set the polisher to speed setting 2 and work across an area of paintwork around 18inch x 18inch. Apply moderate pressure and work in overlapping passes. Work up to speed 4 and then back down to 2 for a final pass until the product turns clear. Once you’ve finished one panel, switch off the polisher and buff off the panel with a clean microfibre for any excess reside.
Features
- Step one in our three-step Revitalise process to a fine-cut finish.
- Fully restoring abrasive compound for hard paint types.
- Removes deep swirl marks, as well as oxidation defects.
- Use in partnership with our orange Revitalise Pad No:1 for best results.
Directions for use
We've put together a few simple steps to help you get the best out of Revitalise No:1 (V2) highlighting what you should be doing to get the most out of Revitalise No:1 (V2) when detailing your pride and joy.
Shake well before use
Always work on a cool surface
Ensure surface is clean, dry and free from contaminants
Using the accompanying pad type, “Restoring” (pad 1) prime the pad with 2 mists of “Pad Prime”
Apply 2-4 small pea sized amounts of polish to the pad
Work across an area of paintwork approx 2’x2’ at a time, starting at speed 2, working up to speed 4 and back down to speed 2, fully work until product is clear
Wipe off residue immediately after each panel