Revitalise System V2
- Product Type:
- Paint correction kit
- Product Code:
The Auto Finesse Revitalise Paint Correction Kit is a three-step programme to perfect paint. The system features a three-grade compound system to revitalise your vehicles paintwork, removing oxidation, holograms and even swirl marks. For use together with a DA or rotary machine polisher.
The kit includes the following:
3 x compounds and 3 x matching pads.
Our Revitalise Paint Correction Kit features three steps: Step One: Our Restoring Compound and Restoring Pad. The Restoring Compound is our cutting compound capable of taking care of the most neglected finishes. Step Two: Our Polishing Compound and Polishing Pad. The Polishing Compound restores swirl marks and paint dullness. Step Three: Our Refining Compound and Refining Pad for an ultra-crisp finish. All of which are colour coded to make it easy to match compound to pad. The Revitalise system is designed for application on all types of paintwork, both vintage single stage and modern two stage, clear coated paintwork.
1 x Pad Cleaning Brush.
Our Pad Cleaning Brush is perfect for cleaning pads on the go. When polishing an entire vehicle, a polishing pad can become clogged up with excess polish and residue. Our pad cleaning brush keeps this down to a minimum. Simply run the pad cleaning brush across the face of the pad - the stiff bristles will help remove excess polish build-up.
2 x Microfibre Work Cloths.
The work cloth is our most versatile of cloths. Measuring in at 400mm x 400m, it has a 300GSM and is made up of soft white microfibre which is ideal for all manner of cleaning tasks, whether it’s removing your favourite wax or sealant or deep-cleaning your dash.
1 x Pad Prime Pad Lubricant.
Auto Finesse Pad Prime is the ideal product for prepping your machine polishing pads, before use. Pad Prime eliminates the scrubbing of a new foam pad on automotive finishes. Auto Finesse Pad Prime should always be used on foam pads before performing any paint compounding, polishing or refining. All it takes is a light mist of Pad Prime to ready your foam pad for machine polishing.
1 x Masking Tape.
This yellow masking tape is for masking up areas such as plastics and rubbers. This masking tape is also perfect for masking up panel gaps.
Kit also includes detailed instructions.
- 3-grade compound system to revitalise your vehicles paintwork.
- Removes all oxidation, swirl marks and holograms from your paintwork.
- Colour coded system so your experience runs smoothly.
- Includes instructions, if you are new to using a DA polisher.
Directions for use
We've put together a few simple steps to help you get the best out of Revitalise System V2 highlighting what you should be doing to get the most out of Revitalise System V2 when detailing your pride and joy.
Use the masking tape supplied to mask off any sensitive areas such as plastic and aluminium trim, badges, grills and headlamps to prevent polish staining, or “glossing” of matt finished areas, ensure the trim and all gaps are fully dry before proceeding to this stage.
After attaching the pad to the backing plate of your polishing machine and taking extra care to ensure the pad is centrally located to the backing plate, add a single spritz of pad prime to the face of the polishing pad, this is to eradicate the likeliness of “dry scrubbing” and lubricates the pad to work smoothly across the paintwork preventing “grabbing” or “hopping”
Apply two small pea sized amounts of product to the pad, in opposite areas on the pad. Apply the pad to the paint surface before starting the polisher. The machine should always be started and stopped whilst on the paintwork to avoid product “sling”
With the machine set to the lowest speed (No:1 – A) spread the product across a section approximately, 2ft x 2ft (60cm x 60cm) then raise the machines speed to somewhere between setting 4-6, depending on what feels comfortable to work at. Apply moderate pressure and work in overlapping passes, ensuring the machine is always spinning as described above in “getting set to polish”
Work the polish until almost clear, the average time per set should be around 1:50 minutes for a set
After each set, remove the polish using the microfiber towel supplied and check with a strong light source