My Basket

 
  • Your basket is empty!

    Let's change that.

Get a faster checkout!

Hard Waxes

Illusion 150g

Show car wax

The Auto Finesse Illusion wax is made up of 48% T1 Grade Brazilian Carnauba Wax by volume, with the remainder being made up by synthetic polymers, and gloss-intensifying oils. Illusion can provide 2-3 months of staying power and has a strawberry-liquorice scent. All Auto Finesse waxes are carefully blended by hand in Great Britain and treat your vehicle with nature’s own defense against the elements, giving it water repellency, and resistance to environmental pollution (Including UV-fading, acid rain, and bird droppings.). Whether your car or motorcycle has a modern clearcoat, or a classic single-stage paint system, Auto Finesse waxes will give it the protection it needs to survive the realities of everyday life. Application: Before wax, make sure the vehicle is clean. Use a clay bar to ensure there is no bonded contamination to its surface. If paintwork hasn’t been polished in the last 6-12 months it’s wise to prep the surface with a pre-wax cleanser. Use a foam applicator (Waxmate) at half a turn in the wax pot – this coats it ready for waxing. Apply using small, even and overlapping strokes. Wax goes a long way so use sparingly. One you’ve completed one panel, move to the next panel, then when that is complete buff off the previous. If wax has dried, or ‘secondary hazing’ of the wax occurs (A phenomenon which can sometimes happen in hot or humid climates, especially if the product was over-applied.), you can use a water-based quick detailer (Finale) to help ease removal of the residue. It’s important to wait at least 3 hours in between coats or layers of wax and don't wax it if the ambient temperature is below 6 degrees Celsius or above 25. It's also important not to wax in direct sunlight, due to possible curing issues.40

Read more


  • £74.95

Oppps, we only have in stock, please lower the quantity amount

Out of Stock

In Stock, ready to despatch

Illusion

  • Developed to bring a dripping wet finish to paintwork.
  • 2-3 month durability.
  • Blended with 48% T1 grade Brazilian carnauba wax and essential oils.
Illusion 150g
Illusion 150g
Illusion 150g

Illusion

Illusion by Auto Finesse® creates the illusion of a dripping wet finish to paintwork. Whether your car or motorcycle has a modern clearcoat, or a classic single-stage paint system, Auto Finesse waxes will give it the protection it needs to survive the rea

Illusion 150g


Categories:
Hard Waxes
Product Type:
Show car wax
Product Code:
ILL150

The Auto Finesse Illusion wax is made up of 48% T1 Grade Brazilian Carnauba Wax by volume, with the remainder being made up by synthetic polymers, and gloss-intensifying oils. Illusion can provide 2-3 months of staying power and has a strawberry-liquorice scent.

All Auto Finesse waxes are carefully blended by hand in Great Britain and treat your vehicle with nature’s own defense against the elements, giving it water repellency, and resistance to environmental pollution (Including UV-fading, acid rain, and bird droppings.).

Whether your car or motorcycle has a modern clearcoat, or a classic single-stage paint system, Auto Finesse waxes will give it the protection it needs to survive the realities of everyday life.

Application:

Before wax, make sure the vehicle is clean. Use a clay bar to ensure there is no bonded contamination to its surface. If paintwork hasn’t been polished in the last 6-12 months it’s wise to prep the surface with a pre-wax cleanser.

Use a foam applicator (Waxmate) at half a turn in the wax pot – this coats it ready for waxing. Apply using small, even and overlapping strokes. Wax goes a long way so use sparingly. One you’ve completed one panel, move to the next panel, then when that is complete buff off the previous.

If wax has dried, or ‘secondary hazing’ of the wax occurs (A phenomenon which can sometimes happen in hot or humid climates, especially if the product was over-applied.), you can use a water-based quick detailer (Finale) to help ease removal of the residue.

It’s important to wait at least 3 hours in between coats or layers of wax and don't wax it if the ambient temperature is below 6 degrees Celsius or above 25. It's also important not to wax in direct sunlight, due to possible curing issues.

Features


  • Developed to bring a dripping wet finish to paintwork.
  • 2-3 month durability.
  • Blended with 48% T1 grade Brazilian carnauba wax and essential oils.
Related posts

Related Posts

Car Wax, What, Why & How

Carnauba wax has been in the industry for many years now, however, it can often be hard to find the right carnauba wax for you and your vehicle. At Au...

Read more

Directions for use

We've put together a few simple steps to help you get the best out of Illusion 150g highlighting what you should be doing to get the most out of Illusion 150g when detailing your pride and joy.

1.

Ensure bodywork is clean, dry and free from contaminants

2.

If necessary treat paintwork prior to application with a paintwork cleanser.

3.

Use a foam applicator (Waxmate) at half a turn in the wax pot – this coats it ready for waxing. Apply using small, even and overlapping strokes. Wax goes a long way so use sparingly.

4.

Once you’ve completed one panel, move to the next panel, then when that is complete buff off the previous.

5.

If wax has dried, or ‘secondary hazing’ of the wax occurs (A phenomenon which can sometimes happen in hot or humid climates, especially if the product was over-applied.), you can use a water-based quick detailer (Finale) to help ease removal of the residue.

6.

It’s important to wait at least 3 hours in between coats or layers of wax and don't wax it if the ambient temperature is below 6 degrees Celsius or above 25. It's also important not to wax in direct sunlight, due to possible curing issues.