01 / WHY YOU'LL LOVE IT

YOUR NEXT
BETTER DETAIL.

Serious cleaning power. Surprisingly little product. Dynamite is our highly concentrated citrus pre-wash, developed to cut through traffic film, road grime, bugs and stubborn contamination before the contact wash. Unlike a ready-to-use pre-wash, Dynamite is designed to be diluted to suit the job. Mix it up to 1:10 for lighter cleaning and a single 1-litre bottle makes up to 11 litres of ready-to-use solution — bringing the cost down to just £1.54 per mixed litre. Need more bite? Simply increase the concentration for dirtier vehicles and tougher cleaning jobs. One concentrate. Multiple strengths. A whole lot of cleaning power.

SEE WHAT IT DOES
Dynamite Traffic Film Remover
AUTO FINESSE / CLEANERS & DEGREASERS
02 / THE BENEFITS

WHY IT
EARNS ITS
PLACE.

01

Dissolves the harshest contamination

Dynamite breaks down and lifts all kinds of road grime, encapsulating harmful particles and allowing them to be rinsed away without damaging sensitive surfaces. Power through traffic films, mould, heavy soiling, organic matter, bird droppings...

02

Gentle on protection layers

This can be used on all exterior surfaces, including paintwork, vinyl wraps, glass, wheels, rubber and trim. Tough on the harshest baked-on contamination but gentle on protection layers, Dynamite will not strip your waxes, paint...

03

Suitable for heavy degreasing

Developed for easy, contactless use Dynamite is suitable for heavy degreasing and deep-cleaning but safe on the most sensitive finishes such as bare metal, paint, rubber and plastics. Simply spray directly onto all exterior surfaces...

04

Dilute-To-Suit Formula

1-litre of concentrate makes up to 10-litres of powerful cleaning solution. Simply dilute at a ratio of 1:2-1:10 depending on the cleaning intensity required for the task in hand. From wheel cleaning and targeted deep-cleaning...

03 / THE RIGHT WAY TO USE IT

THE PROCESS.
MADE SIMPLE.

Follow the product instructions and recommended technique. Always check the product label before use.

  1. 01

    Dilute at a suitable ratio between 1:5 - 1:10 for the job in hand.

  2. 02

    Apply directly to the surface to be cleaned.

  3. 03

    Using a pressure washer or hose, rinse thoroughly from the surface.

  4. 04

    For heavily soiled areas reapply and agitate with a dedicated brush or mitt.

  5. 05

    Follow up by washing the vehicle in your usual manner.

MAIN PRODUCT
WHY IT WORKS
CUSTOMER REVIEWS
HOW TO USE
WATCH
QUESTIONS
MORE PRODUCTS
Before
After
BMW logo on dirty car boo
BMW logo on car boot
Before
After
BMW logo on dirty car boo
BMW logo on car boot

Product Information


Product Type: Concentrate pre-wash solution
Product Code: DYN1

This is the pre-wash you mix to match the job.

Dynamite is a powerful concentrated citrus Traffic Film Remover developed for the dirtier side of car care. It breaks down heavy road grime, traffic film, bugs and stubborn contamination across paintwork, wheels, arches, door shuts and other exterior surfaces.

The difference is in the concentration.

Rather than paying for a bottle that's already been diluted, Dynamite gives you the concentrated product and lets you choose the strength you actually need.

For lighter cleaning, dilute Dynamite up to 1:10 — turning one 1-litre bottle into as much as 11 litres of usable pre-wash. At the current £16.95 bottle price, that's equivalent to around £1.54 per litre of ready-to-use cleaner.

For heavier contamination, increase the concentration accordingly. That means the same bottle can handle everything from routine pre-washing to heavily soiled wheels, arches, door shuts and winter grime.

Power when you need it. Economy when you don't.

How to Use Dynamite Traffic Film Remover

  1. Dilute Dynamite according to the level of dirt (1:2 for heavy grime, up to 1:10 for lighter cleaning).
  2. Apply liberally with a pressure sprayer or foam lance from bottom to top.
  3. Let it dwell for 3–5 minutes to break down contamination.
  4. Gently agitate stubborn areas with a soft detailing brush if needed.
  5. Rinse thoroughly with high pressure.
  6. Follow with Avalanche Snow Foam or your safe two-bucket wash.

Product Summary


  • Highly concentrated citrus Traffic Film Remover
  • 1L makes up to 11L of ready-to-use solution
  • As little as £1.54 per mixed litre at 1:10
  • Dilute the strength to suit the cleaning task
  • Cuts through traffic film, road grime, bugs, salt and stubborn dirt
  • Suitable for paintwork, wheels, arches, door shuts and lower panels
  • Ideal as a powerful first stage before snow foam and contact washing
  • Stronger concentrations can be used for tougher cleaning tasks
  • Apply by pressure sprayer or foam lance

THE SCIENCE / FOR THOSE WHO WANT TO KNOW

WHAT'S IN THE DETAIL.

A little more on what makes Dynamite Traffic Film Remover work.

THE FORMULATION

Alkaline traffic-film removal

Dynamite uses an alkaline cleaning system to loosen road grime, traffic film and oily contamination before contact washing. Surfactants wet the surface and help lift soils into the rinse water.

pH / AS SUPPLIED11–11.5

THE CHEMISTRY

Anionic and nonionic surfactants work alongside a glycol-ether solvent to tackle different components of road film.

DETAILER'S INSIGHT

Treat it as a pre-wash: give it the appropriate working time, then rinse thoroughly before moving to your contact wash.

For the best results, follow the product instructions and use the right technique for the surface.

Pair this with


0 items in the basket

FAQ

Popular questions from our customers

Message Our Team

Accepted files: .jpg Maximum 4 files allowed