Spend 
PROTECT PAINT
Gloss, depth, hydrophobic performance and durable protection for exterior paint.
CARAMICS
CERAMIC PROTECTION MADE SIMPLE
Up to 3 years of ceramic protection for paintwork and wheels.
THE DIFFERENCE IS CLEAR
SEE IT AT WORK
A treated surface behaves differently. Use the comparison to show the result, not just describe it.
UP TO 3 YEARSPROTECTION
PAINT + WHEELSONE COATING
WATER-REPELLENTHYDROPHOBIC FINISH
CARAMICS CERAMIC COATING
SERIOUS PROTECTION
ONE SIMPLE KIT
A complete ceramic-coating kit designed to deliver durable protection, enhanced gloss and hydrophobic performance across paintwork and wheels.
£119.95 GBP
WHY CARAMICS
PROTECTION THAT GOES BEYOND
PROTECT
Durable protection against everyday environmental contamination.
REPEL
Hydrophobic behaviour helps water evacuate the surface.
ENHANCE
Adds depth, gloss and clarity to the finish.
MAINTAIN
Makes the protected surface easier to keep looking its best.
ONE COATING
PAINT TO WHEELS
One coating, engineered for two of the hardest-working exterior surfaces.
PROTECT WHEELS
Protect one of the hardest-working and contamination-prone areas of the vehicle.
THE CARAMICS SYSTEM
PREP. COAT. MAINTAIN.
Great ceramic protection doesn't begin and end with the coating.
01 / PREP
THE FINISH STARTS BEFORE THE COATING.
A ceramic coating can only lock in the surface you give it. Clean thoroughly, remove contamination and correct the finish where needed before the final panel wipe.
WASH
Start with a thorough safe wash.
DECONTAMINATE
Remove bonded contamination before coating.
CORRECT IF REQUIRED
Polish where needed to create the finish you want to lock in.
PANEL WIPE
Leave the surface clean and residue-free immediately before coating.
EVERYTHING YOU NEED TO PREP
02 / COAT
APPLY. LEVEL. PROTECT.
Work methodically across the surface. Apply evenly, allow the coating to flash, then buff to a clear finish and leave it to cure.
SHAKE
Shake the bottle before use.
APPLY
Apply Caramics evenly using the supplied applicator.
WAIT
Allow approximately 1–2 minutes before buffing.
BUFF
Buff using the supplied microfibre cloth.
CURE
Leave the coating undisturbed while it cures.
1–2 MINSBEFORE BUFFING
5 HOURSBEFORE DRIVING
24 HOURSKEEP AWAY FROM WATER
BUILT FOR WHAT COMES NEXT.
Ceramic protection isn't just about the day you apply it. It's about every drive, wash and mile that follows.
03 / MAINTAIN
Keep IT Working
A simple maintenance routine helps preserve the finish and keep Caramics performing at its best.
SAFE WASH
Use a safe routine that minimises wash-induced defects.
DRY
Dry safely without dragging contamination across the finish.
FINISH WITH FINALE
Finish with Finale to restore that freshly detailed look after washing and drying.
FINISH WITH FINALE
COMPLETE THE PROTECTION
DON'T STOP AT THE PAINT
You've protected the paintwork and wheels. Take the same approach to the surfaces Caramics doesn't cover.
FABRIC
Fabriguard Interior Protectant
Protect fabric surfaces against spills and contamination.
GO DEEPER
MASTER CERAMIC PROTECTION
Preparation, application and maintenance guidance for getting more from ceramic protection.
How To Maintain Protected Paint
You've spent the time washing, decontaminating and protecting your paintwork, whether that's with a wax, sealant or ceramic coating.
CARAMICS, ANSWERED
EVERYTHING YOU NEED TO KNOW
Straight answers to the questions that matter before, during and after application.
-
Yes. Caramics has been developed to make ceramic protection straightforward to apply at home. Work a section at a time, apply the coating evenly, allow around 1–2 minutes for it to bond, then buff with a clean microfibre cloth. Good preparation and following the application process are key to getting the best result.
-
Yes. The same Caramics Ceramic Coating can be used on both paintwork and wheels, so you don't need a separate wheel coating. Apply it to clean, properly prepared surfaces using the same careful application process.
-
A 30ml bottle is designed to provide enough product to coat a vehicle, although exact coverage will vary depending on the size of the vehicle, the surfaces being coated and how heavily the product is applied.
-
Not necessarily. Polishing isn't required for the coating to work, but Caramics will lock in the finish beneath it. If the paint has swirls, oxidation or other defects you want to remove, correct these before applying the coating. Whatever the condition of the paint, the surface should be thoroughly cleaned and prepared before application.
-
After application, allow around5 hours before driving the vehicle and keep the coated surfaces away from water for 24 hours while the coating cures.
-
Wash the vehicle regularly using a safe wash process and avoid unnecessarily aggressive cleaning methods. Dry the vehicle after washing and finish with Finale to help keep the coated surface looking its best.