Mint Rims 100ml
- Wheel Waxes
- Product Type:
- Wheel wax
- Product Code:
The Auto Finesse® Mint Rims wheel wax protects your wheels with durable synthetic waxes, keeping them in mint condition.
Mint Rims is created from a blend of high temperature synthetic waxes, and fast flashing solvent carriers. This blend of ingredients helps to seal your wheels from hot, corrosive brake dust and oxidation, while holding up against the rigors of the road. The durability on average is 2-3 months between applications, even on performance vehicles subject to frequent high-speed braking. Mint Rims wheel wax can be used on any wheel finish, including painted, powder-coated, clear coated, anodised, chromed, and bare polished alloys.
We advise applying Mint Rims before a change in weather. This should be before both summer and winter weather changes. Applying Mint Rims wheel wax before these weather changes will make sure that heavy contaminates such as road salt, brake dust and road grime will not adhere to your freshly cleaned wheels.
Freshly refurbished wheels should not be over looked, either. When your wheels come back from paint, powder coating or polishing is the perfect time to lay down a layer of Mint Rims wheel sealant. A top tip is; whilst the wheels are off the car make sure to wax tighter areas such as behind spokes. This will help preserve your wheels and make sure you they always look factory fresh.
Once applied, the need for dedicated wheel cleaners is greatly reduced, and a pH neutral car shampoo is all that is required to bring back a sparkling fresh finish.
- High-gloss finish to repel damaging brake-dust particles.
- Reduces wheel cleaning maintenance schedules.
- Created with high temperature durable synthetic waxes.
- Suitable for use on all wheel finishes.
Start by cleaning the wheels with a strong dedicated wheel cleaner, like Auto Finesse Imperial, making sure to remove all traces of brake dust from the wheel surface. If heavy tar or brake dust deposits persist after cleaning, use dedicated tar and iron fallout remover products like Auto Finesse ObliTARate and Iron Out to get the wheels as clean as possible. At this point you can dry your wheels with a Microfiber Drying Towel. Mint Rims is a very forgiving product when it comes to surface preparation, but at this stage you can also clay and polish your wheels for the best results before sealing. Mint Rims is compatible with Mercury metal polish for bare alloy wheels, and any of our signature Pre-Wax Cleansers for clear and powdercoated finishes. These additional preparation steps will help to significantly increase gloss, remove unsightly scratches, and increase bonding. Once the finish has been prepped to your satisfaction, you can now use a round Foam Applicator, or Waxmate to apply Mint Rims. A little bit goes a long way, so try to apply the product in a thin, even coat. As soon as you have applied the first coat to the entire wheel surface, you can immediately remove the residue with a short-pile Microfiber Towel. Additional coats can be layered immediately, or after you have completed the other wheels. No curing time is necessary. For maximum durability and gloss, we recommend applying 2-3 coats, though one coat will still provide your wheels with decent protection.
For regular maintenance of your protected wheels, a pH-neutral shampoo like Auto Finesse Lather should be all that is necessary. However, if heavier cleaning is needed, Citrus Power will give you the extra grime-removing power you need without degrading the finish. Avoid using strong wheel cleaners, as these will negatively affect the durability of Mint Rims.
Can this be used on matte/satin wheel finishes?
Yes, Mint Rims is safe to use on matte and satin wheel finishes.